elektraLite P100 Manual Part Two - Manual (Page 51)

123
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
1. To select a fixture group Press GROUP 2 ENTER This will give you Group 2. The fixture
group display is virtually the same as
the fixture feature display. The difference
is that on the top right hand
side are the words "fixture(12):1
The figure in the ( ) tells you how
many fixtures are in your group. The
number after the ":" tells which fixture
is currently active. With a mixed group
of different fixtures the display is
marked with Type: (mixed).
2. To change to another fixture Place the cursor over the number Use the "Yes" or "No" Keys.
after the " : "
VERY USEFUL TOOLS
(Tools such as those listed below are only supported if the fixture manufacturer has supplied Group One Ltd. with the neccessary DMX values).
FUNCTION
FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
1. To select a color without using Press COLOR "?" Pressing the color button and then a
the rotaries. number, for example 3, will bring
the third color of a SUPPORTED
color wheel.
2. To select a color from a second Press COLOR 2@3 This will give you the third color
color wheel (if the fixture has two from the second color wheel.
color wheels, of course).
3. To select a gobo without using Press GOBO "a number" Pressing the gobo button and then a
the rotaries number, for example 4, will bring
the fourth gobo of a SUPPORTED
gobo wheel.
4. To select a gobo from a second Press GOBO 2@4 This will give you the fourth gobo
gobo wheel (if the fixture has from the second gobo wheel.
two gobo wheels, of course!).
STORING A PRESET
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES