elektraLite P100 Manual Part Two - Manual (Page 52)

124
1. First get yourself into the Press FIXTURE ENTER You need to either go to the fixture
Fixture Features Screen you want to store as a preset, or
a fixture group. Please see "SET UP"
for individual fixture or fixture group
for group of fixtures.
2. Clear Everything to start from Press CLEAR ALL This takes all dimmer values to Zero
the beginning. (these are HTP channels).All other
channels are also cleared out of the
buffer memory. However remember
because they are LTP channels the
fixtures remain in their Last Position.
It is important to understand the
concept of clear. Please see Tips
Hints, and other “Good Things”
for info on Presets & feature presets.
3. Hi-lite theFixtures you want Press HI-LITE FIXTURE "n" This is a "trick". It will open your
in the preset. ENTER dimmer but won't record that into
the preset. The fixture feature display
has an H at the top right hand side
to tell you, you've hi-lited the fixture.
4. Move the Fixtures into the focus Press FIXTURE "n" ENTER Use the rotaries to position fixture Once you have got the first fixture in
position that you want to record position you can move to the second
and so on. Caution if you move a
rotary with a feature that you do not
want recorded in the preset you must
clear that rotary by pressing CLEAR
ROTARY NUMBER ENTER .
STORING A PRESET
(continued)
FUNCTION FIRST BUTTON SEQUENCE SECOND BUTTON SEQUENCE NOTES
5.Storing the Preset Press STORE PRESET "n" You can use any number from 1 to