AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 15)

Software 9
© 2014 AEM Performance Electronics
3. Next look for a device labeled something close to “AEM Infinity-10 EMS.” It may be listed
under “Other devices.” Right click “AEM Infinity-10 EMS” and select Update Driver Software.
When prompted with “How do you want to search for driver software?” select the second
option, “Browse my computer for driver software Locate and install driver software manually.”
4. Hit Browse and select the “AEM_Drivers_Signed” folder from step 2. Make sure to have the
“Include subfolders” box checked. Hit next.
This should begin to install the driver software onto your computer. Please allow it a moment
to finish installing the driver. Once installation is complete you may close that window. You will
now successfully be able to use the “Connect to USB” option in Infinity Tuner. To confirm the
driver installed properly you can return to your device manager window. The “AEM Infinity-10
EMS” device will now be recognized and fall under the tab “AEM EMS Controllers.”