AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 344)

338
© 2014 AEM Performance Electronics
Infinity User Manual
Air Temp Sensor
AEM P/N 30-2010 (Optional) Air Temp Sensor kit is specifically designed for temperature
measurements in automotive systems. The kit contains one GM style temperature sensor, one
“6” Flying Lead” mating connector assembly, and a weld-in aluminum bung.
Housing Material: Brass with 3/8” NPT Thread (Torque to 25 Ft-Lbs)
Elec. Termination: Integral weatherproof connector, includes mating connector with 6” leads, 18
AWG
Wiring to the Infinity: Polarity does not matter. Connect one wire to harness AIR TEMP lead
and the other to harness SIG GND lead.
Coolant Temp Sensor
AEM P/N 30-2011 (Optional) Water Temp Sensor kit is specifically designed for temperature
measurements in automotive systems. The kit contains one GM style temperature sensor, one
“6” Flying Lead” mating connector assembly, and a weld-in aluminum bung.
Housing Material: Brass with 3/8” NPT Thread (Torque to 25 Ft-Lbs)
Elec. Termination: Integral weatherproof connector, includes mating connector with 6” leads, 18
AWG
Wiring to the Infinity: Polarity does not matter. Connect one wire to harness COOLANT lead
and the other to harness SIG GND lead.