2d table – AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 44
Advertising
38
© 2014 AEM Performance Electronics
Infinity User Manual
2D Table
A 2D Table represents a two-dimensional matrix (two input channels).The two inputs index into a
lookup table for the output.
To add a 2D Table:
1. Select Layout > Add Control > 2D Table.
2. Right Click on the window and select Set Channel.
3. Select the desired 2-Axis Lookup Table from the Channel List dialog box.
4. Click OK.
Advertising