AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 37)

Software 31
© 2014 AEM Performance Electronics
USB Logging – Channel Setup: This dialog allows the user to select channels for USB
logging. Manually select channels by left clicking on the check box or alternately by using the
arrow keys to scroll through the list and the space bar key to select. Logging lists can be saved
for later use by using the Save button. The Load button will load previously saved lists of
channels. The Append button will append a different list of channels onto the existing list of
selected channels. Note that the list of channels for logging is saved in ECU memory. Channels
can't be selected offline. They can only be selected when connected to an ECU.