AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 23
Software
17
© 2014 AEM Performance Electronics
Main
These application preferences are used to set generic application preferences.
Most of these settings will be configured properly by default. The following list might be used
more often by users to customize the application for their preferences:
auto_save_log_data – Periodically save PC log data to disk while logging. Takes effect when
logging starts/restarts.
captureloop_sleep – This sets the PC logging frequency. The number of milliseconds between
data captures from the ECU. A value larger than 1000 (1 second) will be ignored. Lower
performance PCs may benefit from a value greater than 50 here. Depending on the size of the
layout, values less than 20 may result in very large PC log files that take a long time to open and/
or save.
layout_directory – The current directory for layouts.
load_log_with_session – Determines if .itlog files are loaded with a .itssn file is opened.