Plot – AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual User Manual
Page 49
Advertising
Software
43
© 2014 AEM Performance Electronics
Plot
A Plot data logs the output value of one or more channels over time. This channel requires the log
to be enabled: Log | Start Recording.
To add a Plot:
1. Select Layout > Add Control > Plot.
2. Right Click on the window and select Add Channel.
3. Select the desired Channel from the dialog box and click OK.
4. The Y-axis represents the output value, and the X-axis represents time.
Advertising