AEM 30-71XX Infinity Stand-Alone Programmable Engine Mangement System Full Manual - Manual (Page 38)

32
© 2014 AEM Performance Electronics
Infinity User Manual
USB Logging – Get Logs: This menu allows the user to configure the file transfer features for
USB logging.
If Auto-Save On Connect is selected below, the system will automatically transfer file from the
USB storage device to the PC when connected according to the settings in the Upload Files...
dialog shown below.
Define the save path by clicking the Browse... button and choosing a save folder location. A user
File Prefix and File Counter can be chosen as shown in the example above. File Prefix and File
Counter entries are only valid if the USB device is formatted RAW. To select the RAW
formatting for the USB device, right click in the file name window and select format drive.
There is a display filter that allows the user to filter the file list for files above a certain size. All
USB log files are saved individually. Every time the logging conditions are met, a file is opened.
When the logging conditions are no longer met, the file is closed and saved. The Display Filter
can filter out small files that may result from quick logging start/stop conditions.
To choose a list of individual files to save, select them from the list by left clicking the check box.
Alternately, they can be selected by using the arrow keys and space bar to select. Under the
Save category, choose to save either Selected files or All files. The Close on completion option
will automatically close the dialog when the save task is complete.