2N StarGate/BlueTower v5.3 - Manual (Page 123)

123
2N TELEKOMUNIKACE a.s., www.2n.cz
®
Call Simulation
Time interval 1-4
Up to 4 time intervals for call simulation.
Delay between calls
Time in minutes between two automatic calls. You can choose
(every Hard
defined count of minutes) or (randomly between two intervals in Random
minutes).
Answered calls
Ratio of connected calls. Example: If you set 50%, every other call will only be
answered.
Time of ringing
Length of ringing calls before automatic connection or call end.
Time of answered calls
Length of active / connected calls between two modules.
Module choose method
A way of using wireless engines for calls:
Calling / called module range
Cyclical – wraparound using of defined wireless engines;
Random – random use of defined wireless engines.
A group of wireless engines to be used for the Call simulator.
Deny modules in outgoing groups
Disable the modules for outgoing call simulation.
Deny modules in incoming groups
Disable the modules for incoming call simulation.
Reset call counters
Enable the call counter reset for call simulation.
Call limit for each module
Set the call limit for each module.
Call limits of time intervals
Set the call limits for up to 4 time intervals.
Reset minutes counters
Enable the called minutes counter reset for call simulation.
Minutes limit for each module
Set the outgoing call minutes limit for each module.
Minutes limits of time intervals
Set the outgoing call minutes limits for up to 4 time intervals.