2 troubleshooting – 2N StarGate/BlueTower v5.3 User Manual
Page 185
185
7.2 Troubleshooting
FAQ
For tips concerning solutions of other potential problems see
For the recent FAQ refer to the 2N FAQ pages: (
Calls to GSM / UMTS still go over the PRI 2 interface
The prefix you are calling is not included in any prefix list.
There is no rule in the LCR table connecting this prefix list with at least one
GSM outgoing group.
The call type is not voice (FAX, DATA).
The used voice codec is uLaw (the gateway supports aLaw only).
SMS at no answer does not contain the
Calling party number
The
parameter must contain
, which
Text of SMS at no answer
%n
represents the calling party number.
The Init LED is flashing on the GSM / UMTS board
You are using a GSM / UMTS card from a different type of gateway (for
example, you are using a
card in
).
2N BlueTower
®
2N StarGate
®