2N StarGate/BlueTower v5.3 - Manual (Page 147)

147
2N TELEKOMUNIKACE a.s., www.2n.cz
®
4. List of AT Commands
The protocol is derived from a standard AT protocol used for modems and GSM
modules. The command format is AT[command]<CR>, or AT[command]<CR><LF>
irrespective of the case. The response contains no or a few text lines, an empty line
<CR><LF> and the response type: OK, ERROR or BUSY. To repeat the last command,
enter A/<CR>.
Here is what you can find in this section:
4.1 Basic Commands
4.2 Configuration Commands