2n® bluetower, Basic dimensions, Front side division – 2N StarGate/BlueTower v5.3 User Manual

Page 13

Advertising
background image

13

2N TELEKOMUNIKACE a.s., www.2n.cz

®

2N® BlueTower

Basic Dimensions

2N BlueTower

®

 is the smallest of the 2N  PRI gateway family, featuring the capacity

®

up to 8 GSM / UMTS channels. The system is integrated in a small 19" subrack of the
height of 3U, width of 29HP and depth of 320mm. The front side is open, equipped with
slots for plug–in boards with front panels. The panel includes the main switch. In case
not all GSM / UMTS cards are plugged in, the vacant section of the front side must be
covered with a fixed panel(s). An optional antenna splitter can be installed.

The whole backside is covered with a panel with a built–in safety–fuse box and power
socket.  The  main  power  supply  unit  is  inside  the  system  and  is  fully  designed  for
passive cooling. The bottom and upper sides are covered with EMC sheet.

The system bus is designed as a printed circuit board (PCB) with DIN connectors and
fitted to the inner subrack carrier profiles.

Front Side Division

The subrack width is divided into 7x4HP–wide modules in the following sequence (from
right to left):

VoIP version

VoIP card

4HP

Basic or enhanced CPU card

4HP

Empty position

4HP

GSM or UMTS cards (one for two GSM / UMTS channels)

Remaining
space 

(each

4HP)

ISDN version

Empty position

4HP

Basic or enhanced CPU card

4HP

1ISDN PRI or 2ISDN PRI card

4HP

GSM or UMTS cards (one for two GSM / UMTS channels)

Remaining
space 

(each

4HP)

Advertising