2N StarGate/BlueTower v5.3 User Manual
Page 99
99
Add record
enable/disable the selected routing rule.
Disabled –
Message from SMS group – select the SMS group that receives the SMS.
select the action for the received SMS:
Action type –
– the incoming SMS will be routed according to the
Autoclip routing
AutoCLIP table records.
– the SMS will be delivered to the selected user.
Deliver to user
– the SMS will be dropped.
Drop message
select the SMS addressee. This option is valid only if
Deliver to user –
Action
is selected.
type = Deliver to user
set the rule validity time.
Time limitation –
set the days in a week on which the rule shall be valid.
Days limitation –
set the filter for the SMS sender telephone number (CLIP). If the
Clip mask –
selected mask matches the CLIP, the SMS will be routed according to the rules
set above. If not, the SMS will be dropped. The character replaces any string of
*
characters (789789789=789*, e.g.). The character replaces any character
?
(789789789=789??????, e.g.).
set the string to be matched against the SMS text beginning. If a
Text begin –
match is found, the SMS will be routed according to the rules set above.
Note
The rules are applied to incoming SMS sequentially, starting
from the first rule. If all the set rules are met in a row, the SMS
is routed according to the row.
Outgoing SMS routing
This section helps you define the outgoing SMS routing rules, which are included in the
outgoing SMS routing table.