Voip parameters – 2N StarGate/BlueTower v5.3 User Manual
Page 74
74
Others
PIN – PIN code for the SIM cards that request the PIN code. Caution
Tip
A SIM card with a PIN code other than that set in the GSM
gateway configuration will be blocked with the „pin–err cause.
To unblock the so–rejected SIM card, enter the correct PIN on
your mobile phone!
End of dialling (empty=off) – a selectable DTMF code for DTMF dialling end in
the event of a DISA incoming call. The default value is „#.
List of Emergency Numbers
The window displays a list of emergency numbers, which are normally routed to the
PRI interface. If the PRI line is disconnected, the emergency numbers are dialled
automatically via any GSM/UMTS module according to the following rules:
Search of a logged–in GSM/UMTS module (regardless of free minutes);
Search of a blocked or network searching GSM/UMTS module.
The table includes an exact format of the number to be called (112,911, etc.). The ‘x’
placeholder stands for any digit in the number to be called. The ‘_’ placeholder means
the rest of the number. For example:
Format
Allowed numbers
123
123 only
14x0
1400, 1410, 1420, ...1490
999_
All numbers starting with 999
LED indication
GSM signal mode –
set the GSM module signal LED indication.
None
Module1 only
Module2 only
All modules
VoIP Parameters
VoIP Functions
Day of deleting statistics on VoIP (every month) – set the day for
automatic deletion of call statistics via the VoIP interface. None = statistics will
not be deleted automatically.