INFICON UL1000 Helium leak detector - Manual (Page 18)

18
General Information
iina
70
e 0
1
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
1.4.2 Accessories and Options
The following parts can be ordered additionally:
1.4.2.1 Sniffer line SL200
By use of the sniffer line the UL1000 and UL1000 Fab can easily be converted to a
sniffer leak detector. The length of the sniffer line is 4m (i.e. 12 feet).
1.4.2.2 Toolbox
The toolbox is a detachable compartment with a lockable lid. Fittings and small
fixtures can be stored plus the hand set (Please refer to Chapter
1.4.2.5 ). The
storage volume is approximately 5 l.
The toolbox is placed on the working surface and jammed by the handle.
1.4.2.3 Helium Bottle Holder
The helium bottle holder allows you to carry a helium reservoir and a spray gun with
the UL1000 and UL1000 Fab. Only small and midsize bottles (max 10 l, 200 bar) will
fit without influencing the stability of the UL1000 and UL1000 Fab.
1.4.2.4 ESD Mat
This mat is put on the working surface of the UL1000 and UL1000 Fab and is
clamped and grounded by the inlet port ring. It avoids electrical discharges between
the working surface and sensitive test parts.
• Sniffer Line SL200 14005
• Leak Ware 14090
• Helium Sniffer QUICK-TEST QT100 15594
• Tool Box (detachable) 551-000
• Helium Bottle Holder 551-001
• ESD Mat 551-002
• RC1000 Remote control
– RC1000WL wireless version
– RC1000C cable version
– Extension Cable, 8 m
551-015
551-010
14022
• Test chamber TC1000 551-005
• spray gun with hose 16555
• set of plugs 20099024
• LeakWare (software package) 14090