Service message exhaust filter, Parameter save / load, Load parameter set – INFICON UL1000 Helium leak detector User Manual
Page 81: 6 parameter save / load, Warning
Description of the Menu
81
iina
70
e 0
6
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
6.6.5.6
Service message exhaust filter
The exhaust filter must be maintained at regular intervals to ensure the correct
function of the UL1000 and UL1000 Fab. If the service message is activated, the
UL1000 and UL1000 Fab reminds you of the required maintenance.
6.6.6
Parameter save / load
•
>
>
> Load
Enables to save and load individual settings or reload the default settings.
6.6.6.1
Load parameter set
•
>
>
> Save
Save the current parameter settings.
Softkey 3:
Off
Softkey 5:
Help
Softkey 7:
On
Warning
If the service messages are ignored and the exhaust is not replaced a risk for
overheating the pump motor exists.
Softkey 2 to 4: The names of the current values can be saved under a free
choosable name. The saving of 3 different sets is possible.
Please refer to Chapter
Softkey 5:
load default values
The factory setting have to be loaded again.
Softkey 6 to 8: One of three saved parameter sets can be loaded.
Please refer to Chapter
Softkey 4:
Edit a file name
Rename the parameter set.