INFICON UL1000 Helium leak detector - Manual (Page 75)

Description of the Menu
75
iina
70
e 0
6
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
6.6.4 Interfaces
• Main Menu > Settings > Interfaces
The parameters of the interface can be set.
6.6.4.1 Control Location
• Main Menu > Settings > Interfaces > Control Location
Softkey 3: Control Location
Please refer to Chapter 6.6.4.1
Softkey 4: RS232 Protocol
Please refer to Chapter 6.6.4.2
Softkey 7: Recorder output
Please refer to Chapter 6.6.4.3
Softkey 8: Scaling Recorder Output
Please refer to Chapter 6.6.4.4
Softkey 2: PLC
The UL1000 and UL1000 Fab is controlled via the Digital In connector (See Chapter
2.3.2.3 ). The START, STOP and ZERO buttons at the control panel are locked.
Softkey 3: RS232
The UL1000 and UL1000 Fab is controlled via RS232 interface by an external
computer. In this mode the UL1000 and UL1000 Fab can not be controlled via
keyboard. The START, STOP and ZERO button at the machine are deactivated.
Taste Nr. 4 All
UL1000 and UL1000 Fab can be operated via the digital input, the RS232-interface
and the keyboard.
Softkey 5: Local & PLC
The UL1000 and UL1000 Fab is controlled via the Digital In connector or the
START, STOP and ZERO buttons at the control panel.
Softkey 6: Local & RS232
The UL1000 and UL1000 Fab is controlled via the Digital In connector or the
START, STOP and ZERO buttons at the control panel.
Softkey 7: Local
The UL1000 and UL1000 Fab is controlled via the START, STOP and ZERO buttons
at the control panel. The Digital In connector is not used.