INFICON UL1000 Helium leak detector - Manual (Page 21)

Installation
21
iina
70
e 0
2
.f
m
te
chn
ica
l ha
nd
boo
k
(1
40
8)
2 Installation
2.1 Transportation
UL1000 Fab with Triscroll TS 620
For transportation the chassis plate where the pump is mounted on has to be
secured by a transportation fixing.
This transportation fixing consists of 2 screws at chassis of the UL1000 Fab (one on
each side).
To get access to these screws remove the side covers of the UL1000 Fab.
There are orange labels on the bottom part pointing to the screws:
Caution
The UL1000 and UL1000 Fab is not equipped with any crane eyes and must
therefore not be transported using lifting equipment.
Warning
The UL1000 and UL1000 Fab must only be pushed or pulled along using the handle
provided for this purpose. Don’t use the handle to lift.
Caution
Your feet can be pinched.
Keep your feet away from the rollers. .
Caution
Your feet can be run over.
Do not pull the unit, push it
Caution
When transporting over longer distances the original packaging must be used. The
castors must not be fixed when the UL1000 and UL1000 Fab is shipped in a crate.