Table 2.1: baud rate switch settings – INFICON STM-100/MF Thin Film Deposition Monitor User Manual
Page 30
Advertising
SW6
SW7
BAUD
OFF
OFF
300
OFF
ON
1200
ON
OFF
2400
ON
ON
9600
Table 2.1: Baud Rate Switch Settings
SW8, SW9, SW10, SW11, SW12 DEVICE ADDRESS SELECTION
These switches in combination select the device address for the
instrument when operating with the SECS RS-232 protocol or with
either the IEEE-488 or BITBUS communications option cards.
These options allow
multiple devices to operate on a single bus,
and only the individual addressing prevents response conflicts.
Switch coding is in binary 1 of 32 format with SW8 the MSB and
SW12 the LSB. These switches are sensed only during power-
up. See Table 2.2 for a list of addresses.
OPERATION AND PROGRAMMING
Page 2 - 10
Advertising