INFICON VGC401 Single-Channel Controller - Manual (Page 18)

18
tinb01e1-f (2011-07) VGC401.om
DANGER
DANGER: protection class of the control
panel
If the product is installed in a rack, it is likely
to lower the protection class of the rack
(protection against foreign bodies and water)
e.g. according to the EN 60204-1 regulations
for switching cabinets.
Take appropriate measures for the control
panel to meet the specifications of the pro-
tection class.
For mounting the VGC401 into a control panel, the fol-
lowing cut-out is required:
105
91.2
78 69
M3 or ø 3.5
The admissible
maximum ambient
temperature (
→  9)
must not be
exceeded neither
the air circulation
obstructed.
For reducing the mechanical strain on the front panel,
preferably support the unit.
n
Slide the VGC401 into the cut-out of the control
panel …
… and secure it with four M3 or equivalent screws.
3.2.2 Installation in a
Control Panel