INFICON VGC401 Single-Channel Controller - Manual (Page 77)

tinb01e1-f (2011-07) VGC401.om
77
7 Troubleshooting
and the error relay opens ( →  24).
Possible cause and remedy/
acknowledgement
Parameter setup lock activated
(
→  50).
Possible cause and remedy/
acknowledgement
Interruption or instability in sensor line
or connector (Sensor error).
Ö Acknowledge with the para key.
If the problem persists, or
is displayed
Possible cause and remedy/
acknowledgement
Error messages concerning BPG, BAG
and HPG.
Meaning
→ [6], [7], [8], [14].
0 = no communication to the gauge
1…9 = High-Byte of Error-Byte
(BPG400, HPG)
1…6 = Error status (BAG)
Possible cause and remedy/
acknowledgement
Error messages concerning BCG and
BPG402.
Meaning → [15], [21].
xx = Error byte (HEX)
Signalization of errors
Error messages