INFICON VGC401 Single-Channel Controller - Manual (Page 74)

74
tinb01e1-f (2011-07) VGC401.om
Transmit: TIO [,x] <CR>[<LF>]
│
└─ x =
0 –> Stops the test (default)
1 –> Setpoint relay off,
error relay off
2 –> Setpoint relay on,
error relay off
3 –> Setpoint relay off,
error relay on
4 –> Setpoint relay on,
error relay on
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: x
<CR><LF>
│
└─ I/O test status
Transmit: TKB <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Receive: xxx
<CR><LF>
│││
││└─ Key 3 x = 0 –> Not pushed
││ 1 –> Pushed
││
│└── Key 2
│
└─── Key 1
para
Transmit: TRS <CR>[<LF>]
Receive: <ACK><CR><LF>
Transmit: <ENQ>
Starts the test (repeats each
character, test is interrupted
with <CTRL> C).
I/O test
Operator key test
RS232 test