INFICON VGC401 Single-Channel Controller User Manual
Page 48
Advertising
48
tinb01e1-f (2011-07) VGC401.om
Ö
The name of the parameter
e.g.:
Firmware version
is displayed.
→ 49
49 50
The name of the parameter is dis-
played as long as the key is pressed
or at least for 2 s.
The firmware version is continuously displayed.
→
50 51 51 52 52 53 53 54 54
The name of the test program is displayed until
it is started.
para
para
Ö
Increase/decrease the value
by the defined increments.
Selecting a parameter
Modifying a
parameter
Advertising