INFICON VGC401 Single-Channel Controller User Manual
Page 85
Advertising
tinb01e1-f (2011-07) VGC401.om
85
If the program transfer was successful, quit the Update
mode by turning the VGC401 off.
Wait at least 10 s before turning the VGC401
on again in order for it to correctly initialize
itself.
The VGC401 is now ready for operation. To be
sure, check that the current parameter settings are
identical with the previously defined settings
(
→ 82).
Starting the VGC401
with the updated firm-
ware
Advertising