INFICON VGC401 Single-Channel Controller User Manual
Page 51
Advertising
tinb01e1-f (2011-07) VGC401.om
51
Test of the program memory.
Test sequence
The test runs automatically one
time:
Ö
Test in process
Ö
Test finished, no error found.
After the test, a four-digit
checksum (hexadecimal for-
mat) is displayed.
Ö
Test finished, error(s) found.
After the test, a four-digit
checksum (hexadecimal for-
mat) is displayed. The
lamp flashes.
Test of the parameter memory.
Test sequence
The test runs automatically one
time:
Ö
Test in process (very briefly).
Ö
Test finished, no error found.
Ö
Test finished, error(s) found.
The
lamp flashes.
EPROM test
EEPROM test
Advertising