Kinze 3500 Lift and Rotate Planter Rev. 7/14 User Manual

Page 120

Advertising
background image

M0240-01

Model 3500

6-24

6/11

TM

Lubrication and Maintenance

Check nuts and hardware periodically for proper torque.

NOTE: Torque ⅝" spindle hardware to 120 ft-lb (162 N-m).

Be sure coulter is positioned square with row unit and aligned in front of row unit disc opener.

Coulter blade can be adjusted to one of four settings. Initially blade is set in highest position. As blade wears it can be
adjusted to one of three lower settings. See “Row Unit Mounted No Till Coulter” in Row Unit Operation section of this
manual.

Replace 16" diameter coulter blade when worn to 14½".

ROW UNIT MOUNTED NO TILL COULTER

STYLE A

(Two sleeves for coulter mounted residue wheels)

STYLE b

(One sleeve for coulter mounted residue wheels)

COULTER MOUNTED RESIDUE WHEELS

STYLE A - Used With Style A Row Unit Mounted
No Till Coulter

STYLE b - Used With Style b Row Unit Mounted No
Till Coulter

Wheel hubs are equipped with sealed bearings. If bearings sound or feel rough when wheel is rotated, replace them.

Advertising