Kinze 3500 Lift and Rotate Planter Rev. 7/14 - Manual (Page 54)

M0240-01 Model 3500
3-20 6/11
TM
Row Unit Operation
Disc furrowers are used to clear crop residue, dirt clods, and dry soil from in front of row units for a clean and smooth
seed bed. The disc furrower may be equipped with 12" solid blades or 12" notched blades. Notched blades are for
heavier residue conditions and cut crop residue and move it aside to prevent plugging or pushing.
ROW UNIT MOUNTED DISC FURROWER (PULL ROW ONLY)
Vertical adjustment can be made in ⅓" increments. Remove lynch pin in vertical support arm and move arm up or
down. Reinstall lynch pin. Finer adjustment can be made by removing lynch pin and using ⅝" x 2¼" set screw to
clamp support arm in position.
Slotted holes in support arm allow front to rear disc blade adjustment. Blades can be adjusted so front edges meet or
cutting edge of one blade overlaps edge of other blade.
NOTE: Dust cap must be removed to make adjustments.
ROW UNIT MOUNTED bED LEVELER (PULL ROW ONLY)
NOTE: Row unit mounted bed leveler is not compatible
with row spacings less than 36".
Vertical adjustment can be made in ⅓" increments. Remove
lynch pin in vertical support arm and move arm up or down.
Reinstall lynch pin. Finer adjustment can be made by
removing lynch pin and using ⅝" x 2¼" set screw to clamp
support arm in position.
Slotted holes in support arm allow blade adjustment. Blades
can be tilted up or down.
Lynch pin
Slotted holes
Dust cap
Disc furrower adjustment
Set screw
Slotted holes
behind blades
in support arm.
bed leveler adjustment
Set screw
Lynch pin