Kinze 3500 Lift and Rotate Planter Rev. 7/14 - Manual (Page 3)

TM
Model 3500 M0240-01
6/11
Predelivery/Delivery Checklist
TO THE DEALER
Predelivery service includes assembly, lubrication, adjustment and test. This service helps to ensure planter is delivered
to retail customer/end user ready for field use.
PREDELIVERY CHECKLIST
Use the following checklist after planter is completely assembled to inspect planter. Check off each item as it is found
satisfactory or after proper adjustment is made.
 Row units properly spaced and optional attachments correctly assembled.
 All grease fittings in place and lubricated.
 All working parts are moving freely. Bolts are tight and cotter pins are spread.
 All drive chains properly tensioned and aligned.
 Check for oil leaks and proper hydraulic operation.
 Hydraulic hoses are routed correctly to prevent damage to hoses.
 Inflate tires to specified air pressure. Tighten wheel lug bolts to specified torque.
 All safety decals correctly located and legible as shown in Parts Manual. Replace if damaged.
 All reflective decals and SMV sign located as shown in Parts Manual and visible when planter is in transport position.
 Safety/warning lights correctly installed and working properly.
 Paint all parts scratched in shipment or assembly.
 All safety lockup devices are on planter and correctly located.
 Seed meters performance checked on test stand. EdgeVac fan, analog gauge, control box, and hoses installed.
 Auxiliary safety chain is properly installed and hardware is torqued to specification.
 Vacuum fan PTO-driven pump is attached correctly to the tractor. Oil reservoir is filled to capacity and system is
inspected for leaks. (If Applicable)
Planter has been thoroughly checked and to the best of my knowledge is ready for delivery to the customer.
(Signature Of Set-Up Person/Dealer Name/Date)
OWNER REGISTER
Name Delivery Date
Street Address Model No. 3500 Serial No.
City, State/Province Dealer Name
ZIP/Postal Code Dealer No.