Lubrication and maintenance, Lubrication, Lubrication symbols – Kinze 3600 Lift and Rotate Planter (70 CM) Rev. 5/14 User Manual
Page 105: Sealed bearings, Wrap spring wrench assembly, Lubrication -1, Lubrication symbols -1, Sealed bearings -1, Wrap spring wrench assembly -1
TM
Model 3600
M0249-01
12/12
6-1
Lubrication and Maintenance
LUBRICATION
Following pages show locations of all lubrication points. Proper lubrication of moving parts helps ensure efficient
operation of your Kinze planter and prolongs the life of friction producing parts.
LUBRICATION SYMBOLS
1. Remove
¼
"-20 x ½" cap screw securng idler assembly to
wrap spring wrench tightener shaft and
2. Remove wrap spring wrench from planter.
3. Tip wrap spring wrench on its side and lubricate with a
high quality spray lubricant. Lubricant must be absorbed
into wrap spring area.
4. Reinstall wrap spring wrench on planter.
WRAP SPRING WRENCH ASSEMBLY
Wrap spring wrench lubrication
Sealed bearings are used on your Kinze planter to provide
trouble free operation.
These are located on drive shafts, row units, and transmission
bearings. Sealed bearings are lubricated for life and are not
serviceable.
Lubricate at frequency indicated
with SAE multipurpose grease.
Lubricate at frequency indicated with high
quality SAE 10 weight oil or spray lubricant.
SEALED BEARINGS
Sealed bearing (Typical)