Kinze 3600 Lift and Rotate Planter (70 CM) Rev. 5/14 - Manual (Page 16)

M0249-01 Model 3600
2-4 Rev. 7/13
TM
Machine Operation
TRACTOR REQUIREMENTS
NOTICE
All Hydraulic Requirements: Minimum Pressure 2350 PSI (16202.6 kPa);
Maximum Pressure 3000 PSI (20684.2 kPa). Check tractor hydraulics to
ensure that maximum pressure cannot be exceeded.
Consult your dealer for information on horsepower requirements and tractor compatibility. Requirements vary with
planter options, tillage, and terrain.
A 12 volt DC electrical system is required on all sizes.
A minimum of two SCV remote hydraulic outlets are required on all sizes. One SCV is used for field lift and with a
control console switch operates raise to transport function. A second SCV using control console operates row markers
fold/unfold functions. Additional SCV's with a zero pressure case drain are needed for EdgeVac vacuum fan motor for
seed metering system Air Seed Delivery, Hydraulic Drive, and Wing Down Pressure (if installed without EdgeVac or
ASD).
Maximum hydraulic flow rate of 49 L/min @ 2000 PSI is required to operate EdgeVac vacuum fan motor.