Kinze 3600 Lift and Rotate Planter (70 CM) Rev. 5/14 - Manual (Page 62)

M0236-01 Model 3600
3-14 Rev. 7/13
TM
Row Unit Operation
ADDITIVES
The use of graphite is recommended to promote seed flow, provide
lubrication for the seed meter and to help dissipate static charge
buildup. Among the available dry seed lubricants graphite is the most
effective and easiest to use and it requires no mechanical agitation
CONVENTIONAL HOPPERS
Mix one tablespoon of
powdered graphite with seed each time
hoppers are filled. Regular graphite use prolongs life of the seed
meter components, improves seed spacing, and may reduce
buildup of seed treatments.
NOTE: DO NOT apply graphite only in center of hopper. It will filter too quickly through the seed and not
distribute as evenly as desired.
Apply graphite around outer perimeter of hopper.
ASD HOPPERS
Mix .5 kg bottle of powdered graphite each time the bulk seed hopper is filled. Graphite should be added in layers as
the bulk seed hoppers are filled. Regular graphite use prolongs life of the seed meter components, improves seed
spacing, and may reduce buildup of seed treatments.
Adding graphite to conventional hopper Adding graphite ASD hopper
Lubricant Application Rate
Graphite
Conventional Hoppers 15 ml/Hopper Fill
ASD Hoppers .5 kg Bottle/Hopper
Talc
Conventional Hoppers 59 ml*
ASD Hoppers 2 kg/Hopper*
*Double amount of talc for sunflowers.
NOTE: Additional graphite may be required to retard buildup of seed treatments on meter components. More
frequent cleaning of monitor seed tubes may be necessary due to use of additional graphite.
Talc seed lubricant may be used as a drying agent in addition to graphite lubrication. The drying agent may improve
seed release and/or to retard buildup of seed treatments on meter components.
1. Fill hopper ½ full of seed, add 59 ml (conventional); 1 kg (ASD) of talc and mix thoroughly.
2. Finish filling hopper, add another 59 ml (conventional); 1 kg (ASD) of talc and mix thoroughly.
3. Adjust rate of talc use as needed so all seeds are coated, while avoiding a buildup of talc in bottom of hopper.
Humid conditions and/or small sized seeds with extra seed treatment may require additional talc to maintain meter
performance.
NOTE: Liquid seed treatments or innoculants may create buildup on the seed disc or brushes. Check
frequently for proper population and/or seed delivery when using any liquid seed treatment.
Completely mix all treatments with seed following manufacturers’ recommendations. Seed treatment dumped on top of seed
after hopper is filled may not mix properly and cause seed bridging, reducing population or stopping meter from planting.