Kinze 3600 Lift and Rotate Planter (70 CM) Rev. 5/14 - Manual (Page 29)

TM
Model 3600 M0249-01
12/12 2-17
Machine Operation
1. With tongue fully extended and planter in raised transport position, remove tongue safety pin and place it in storage
position.
Transport latch locking pin
Locked transport position
Transport latch locking pin
Storage position
Tongue safety pin in storage position
TRANSPORT TO FIELD SEQUENCE
Position planter in a relatively flat open area. Avoid an area with furrows, etc.
SUMMARIZED TRANSPORT TO FIELD SEQUENCE
• Remove tongue safety pin.
• Remove transport latch locking pin.
• Remove manual safety lockup.
• Rotate planter to planting position.
• Raise planter slightly to release safety hook at top of center section.
• Lower planter to ground.
• Release wing locks.
• Rephase planter lift cylinders.
• Raise planter to raised field position and retract tongue.
• Remove row marker lockups.
NOTE: Read following information for detailed instructions.
Tongue safety pin in transport position.
2. Remove transport latch locking pin from locked position and place it in storage location.