Leica Biosystems ST4040 - Manual (Page 33)

33 Leica ST4040 – Linear Stainer
6. Operation
6.5 Switching on mains and selecting direction of travel and alarm volume
• Switch on mains (O = OFF / I = ON).
• The current software version is displayed, in 4 digits, for 10 seconds.
• Only during this phase can the direction of travel and the alarm vol-
ume be selected and/or changed!
• If direction of travel and/or alarm volume have already been selected
and you do not want to make any changes to those parameters either: -
-> go on to Chapter 6.6.
6.5.1 Selecting direction of travel
• Press Start/Stop and hold.
• Depending on the desired direction of travel press the ‘+’ or ‘-’ button:
• Pressing the ‘+’ button:
• Right half of display screen (= indication of seconds) lights up:
--> Direction of travel to the right (= staining starts from the left).
• Pressing the ‘-’ button:
• Left half of display screen (= indication of minutes) lights up:
--> Direction of travel to the left (= staining starts from the right).