11 finishing work, Finishing work, Operation – Leica Biosystems ST4040 User Manual
Page 41
Advertising
41
Leica ST4040 – Linear Stainer
6.
Operation
6.11
Finishing work
•
Once the last slide rack is removed, press ‘Start/Stop’.
•
Close the ball valve.
Do not change the setting of the water tap, so that the adjusted tap
water flow rate remains unaltered!
•
If necessary, add or exchange reagents.
.
•
Cover the stations with the station lids.
•
Close the lids.
•
Leave the fan on, i.e.:
•
Do not switch off the instrument via the ‘ON/OFF’ button or via the
mains switch.
Advertising