Leica Biosystems ST4040 - Manual (Page 44)

44 Instruction Manual V 1.4 – 06/2009
8.1 Cleaning
Prior to cleaning the instrument, always switch off mains and unplug
the power chord!
Dispose of used reagents according to the laboratory regulations in
force in your country!
Spilled solvents (reagents) have to be wiped away immediately! - In
case of long-term exposure, the lid surfaces are only conditionally
resistant to solvents!
The painted surfaces and the control panel are not resis-tant to xy-
lene or acetone!
For cleaning the instrument, do not use any one of the following: al-
cohol, detergents containing alcohol (window cleaner!), abrasive
cleaning powders, solvents containing xylene or acetone!
To clean the lids, control panel and housing, use mild household de-
tergents - see safety instruction above for non-appropriate ingredi-
ents.
When handling cleaning detergents, follow the instructions of the
manufacturer and make sure all applicable laboratory regulations
are complied with!
When cleaning the instrument, no liquid may enter in contact with
any of the electrical connections or get into the interior of the instru-
ment!
8. Cleaning and Maintenance