8 staining, 1 selecting a program, Staining – Leica Biosystems ST4040 User Manual
Page 36: Operation
Advertising
36
Instruction Manual V 1.4 – 06/2009
6.
Operation
•
Draining time can be set from 0 seconds to 60 seconds.
•
Press the agitation button to activate or deactivate ‘Agitation’.
•
(LED illuminated = ‘Agitation’ activated).
•
(LED not illuminated = ‘Agitation’ deactivated).
•
Briefly press the same program button that was selected when you
startled programming (here ‘Prog 1’), until the LED in the button
lights up.
•
The programmed parameters are stored.
•
To select and store parameters for program 2, proceed in identical
fashion.
6.8
Staining
6.8.1 Selecting a program
•
Select the desired program by pressing button ‘Prog 1’ or ‘Prog 2’.
•
Program selection is only possible in stand-by mode.
•
LED in the program button lights up
--> Program (here ‘Prog 1’) is selected.
Advertising