Lenze E94AYCDN - Manual (Page 60)

11 Parameter reference
11.3 Parameters of the communication module for the MXI2 slot
60
Lenze · E94AYCDN communication module (DeviceNet™) · Communication Manual · DMS 5.0 EN · 02/2014 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C14861
C14862
C14863
Parameter | Name:
C14861 | Module state
Data type: UNSIGNED_16
Index: 9714 = 0x25F2
Display of the current module state
Selection list
(read only) Info
0 Nonexistent No online value available (communication module is
offline).
1 Device Self Test The communication module is currently undergoing a
self-test.
2 Device Operational The communication module is working perfectly.
3 Device in Standby The communication module has not been completely
configured yet or the configuration is incorrect.
4 Minor Fault The communication module has a fault that can be
rectified.
5 Unrecoverable Fault The communication module is defective and must be
replaced.
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14862 | Network status
Data type: UNSIGNED_16
Index: 9713 = 0x25F1
Display of the current network status of the DeviceNet node
Selection list
(read only) Info
0 Nonexistent No online value available (communication module is
offline).
1 Not online • The communication module is not supplied with
voltage via DeviceNet.
• The Duplicate MAC ID test has not been completed
yet.
2 Link OK The communication module is working perfectly and has
established a connection to the scanner.
3 Online / Not connected The communication module
• is working correctly;
• has performed the Duplicate MAC ID test;
• has not been connected to the scanner yet.
4 Minor Fault The communication module has a fault that can be
rectified.
5 Critical Link Failure The communication module cannot access the fieldbus
(e.g. Duplicate MAC ID, Bus Off, invalid baud rate etc.).
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT
Parameter | Name:
C14863 | Baud rate
Data type: UNSIGNED_8
Index: 9712 = 0x25F0
Display of the baud rate
Selection list
(read only)
0 125.00 kbps
1 250.00 kbps
2 500.00 kbps
 Read access  Write access  CINH  PLC-STOP  No transfer  PDO_MAP_RX  PDO_MAP_TX  COM  MOT