Lenze E94P PositionServo with MVOB - Manual (Page 10)

8 L PM94H201B_13xxxxxx_EN
Introduction
Reload
Reload the text source file presently stored in the selected drive back into the MotionView
Indexer program folder.
Export
Export text source file (User program). Saves a copy of the program from the Indexer
Program folder as a text file on the PC.
Import
Import text source file (User program). Loads a program from a text file stored on the PC
to the Indexer Program folder.
Run
Start/Continue Program execution. Refer to section 1.4 for full description and prior to
operation.
Reset
Reset Drive. Disable drive, stop program execution, and return program processing to
the beginning. Program will
not restart program execution automatically.
Pause
Stop program execution on completion of the current statement being executed.
WARNING: Pause button does not place the drive in a disable state or prevent execution
of motion commands waiting on the motion stack.
Step
Execute each line of code in the program sequentially following on each press of the
[Step] button. Include step to instructions contained within subroutines.
Step Over Reserved for future use.
Clear Clears the Indexer code.
WARNING
“Load W/O Source” will delete the text source file from both the indexer screen and the drive memory. The user
must ensure they save a copy of the text source file to their PC before proceeding with this operation.
Figure 5: MotionView OnBoard Studio - Indexer Program Display
User
Program
Area
Program
Toolbar
Main
Toolbar
Breakpoint (blue)
Line Number (white)
Program Progression (green)
Column: