Lenze EVF9383 - Manual (Page 79)

Mechanical installation
Fastening the controller on mounting plate
4
l
79 EDKVF9383 DE/EN/FR 4.0
4.3 Fastening the controller on mounting plate
}
Danger!
Risk of injury due to the high weight of the controller.
The controller has to be carried using the eyebolts and an adequate lifting tool.
 ‚
1 2
3
5
4 0 0
5
4
9300vec081
Fig.4−3 Fastening the controller on mounting plate
0 Eyebolts 3 Mounting plate
1 Master 4 16 hexagon socket screws M8 × 25 mm
2 Slave 5 16 spring washers M8
1. Put master and slave on the mounting plate.
2. Fasten the master and slave each with five hexagon socket screws and spring
washers at the top and 3 hexagon socket screws and spring washers at the bottom
exactly at the marked point.