Lenze EVF9383 - Manual (Page 85)

Electrical installation
Master and slave connection
Final works
5
l
85 EDKVF9383 DE/EN/FR 4.0
5.2.5 Final works
9300vec163
Fig. 5−5 Control cables in the master and slave
1. Check the control cables (plugs and cables) for correct fit and possible damages. (
H)
– If the plugs do not fit correctly, or the plugs or cables are damaged, commissioning
is prohibited. Contact the Lenze service.
0 1
9300vec164
Fig. 5−6 Fastening the covers to the master and slave
2. Close the housings using the covers
0 1. Fasten the covers with 4 screws each.