Lenze 8200 series - Manual (Page 7)

Preface and general information
UOMu_^MVMO 1-3
1.3 Legal regulations
Labelling Nameplate CE mark Manufacturer Labelling
Lenze controllers are
unambiguously designated by
the content of the nameplate
Conforms to the EC Low Voltage
Directive
Lenze Drive Systems GmbH
Postfach 10 13 52
D-31763 Hameln
Application
as directed
82XX frequency inverter
D
must only be operated under the conditions prescribed in these Instructions.
D are components
- used for open and closed loop control of variable speed drives withasynchronous standard
motors, reluctance motors, PM-synchronous motors with asynchronous damping cage.
- used for installation into a machine.
- used for assembly together with other components to form a machine.
D are electric units for the installation into control cabinets or similar enclosed operating housing.
D comply with the requirements of the Low-Voltage Directive.
D are not machines for the purpose of the Machinery Directive.
D are not to be used as domestic appliances, but only for industrial purposes.
Drive systems with 82XX frequency inverters
D
comply with the EMC Directive if they are installed according to the guidelines of CE-typical drive
systems.
D can be used
- on public and non-public mains.
- in industrial as well as residential and commercial premises.
D The user is responsible for the compliance of his application with the EC directives.
Any other use shall be deemed inappropriate!
Show/Hide Bookmarks