MK Diamond MK-101Pro24 JCS - Manual (Page 33)

33
MK-101 Pro24 JCS MAINTENANCE
The following maintenance should be performed Monthly.
Monthly Maintenance
(A)
Remove the Diamond Blade.
(B)
Lubricate the Outer Flange
and Retaining-nut.
(C)
Lubricate the Arbor Shaft.
(D)
Verify the Roller Wheel
Assembly is tight and in
good condition.
(E)
Verify all motor mounting
Bolts are tight.
(F)
Verify the Motor Adjustment
Strap is tight.
(G)
Remove the Blade Guard.
(H)
Lubricate the Blade Guard
Pivot Shaft.
(I)
Remove the Cutting Head (See
Adjusting the Cutting Head).
(J)
Lubricate the Cutting Head
Adjustment Knob.
(K)
Lubricate the Cutting Head
Adjustment Knob retaining
holes.
(L)
Lubricate the Cutting Head
Pivot Shaft.