MK Diamond MK-101Pro24 JCS - Manual (Page 37)

37
MK-101 Pro24 JCS MAINTENANCE
(J)
Remove the belt.
(K)
Install the new belt
(MK Diamond Part No. 158194).
(L)
Verify the belt is seated in the
grooves of both pulleys.
(M)
Tighten the Motor Adjustment
Strap to remove slack.
(N)
Check belt tension
(proper tension 1/8-inch).
(O)
Repeat steps N and O until
proper belt tension
is achieved.
(P)
Tighten the motor
mounting bolts.
(Q)
Install the Belt Guard. Tighten
all three bolts.