NTi Audio Acoustilyzer AL1 User Manual

Page 53

Advertising
background image

52

53

Signal Balance shows the matching deviation of the incoming signal

between pin 2 and pin 3 in percent (%). The arrow position indicates the

following:
• Arrow in center, the input signal is balanced.
• Arrow out of center, linear indication of a balancing problem, e.g.

arrow moves left nearer to the number 2 shows the signal level on

pin 2 is higher than on pin 3.

• Arrow at left or right end, the signal balance error is 33% or higher.

33% equals a difference in the signal level of 6 dB.

• 2UBAL-, indicates an audio signal only on pin 2 of the symmetrical

XLR cable → no signal on pin 3.

• -UBAL3, indicates an audio signal only on pin 3 of the symmetrical

XLR cable → no signal on pin 2.

Notes:

• The “Adapter -20dB” should be applied for balanced input levels

higher than +20 dBu (see Accessories for details).

• The THD+N results are calculated using a measuring bandwidth

of 10 Hz - 20 kHz.

Advertising