NTi Audio Acoustilyzer AL1 - Manual (Page 85)

84 85
ML1 - AL1 Crossgrade
The ML1 - AL1 Crossgrade package enables
loading of the Minilyzer firmware onto your
AL1, providing test functionalities, such as
• vu-PPM
• Balance
• THD 2nd - 5th
harmonics
• Scope
• Frequency
Sweep
• Time Sweep
• Induction Loop
Mode
Adapter -20dB
The Adapter -20dB may be applied for
balanced input levels higher than +20 dBu.
This passive adapter extends the balanced
input range of your Minilyzer/Acoustilyzer
up to +40 dBu. The adapter is supplied with
pin1-fuse for safe operation in combination
with the USB interface MiniLINK.
Pouch
The soft pouch protects your Minstrument
against shocks, dust and water. With its
convenient belt-clip you can keep your
Minstrument close to you even when you
need both hands for other tasks.
Now available with a MiniSPL microphone
holder, offering a space to store your mic.
Minstruments System Case
Store your valuable Minstruments test
system consisting of the Minirator MR1, the
Minilyzer ML1 or Acoustilyzer AL1 and the
MiniSPL adequately in the compact system
case which gives you extra space for cables,
connectors and other accessories you may
wish to bring along when you are ‘out in the
field’ checking audio systems.