NTi Audio Acoustilyzer AL1 - Manual (Page 83)

82 83
6. Troubleshooting
Numeric data import of “*.txt” files to Excel
Problem:
Numbers are recognized as text only during the import of numeric test
results to e.g. Microsoft Excel, so you cannot create tables or use the data
for further calculations.
Solution:
The MiniLINK data files use the “.” as decimal separator. Therefore please
set the decimal separator to “.” within Excel before starting the import
procedure.
Alternatively you can use copy → paste in the big view mode, select
the menu “Edit → Copy Text” and paste the data into an open Excel
document.
Factory Reset
To reset the instrument back to factory settings proceed as follows:
• Switch off the unit
• Press the ESC button and the On button at the same time for a few
seconds
• The start-up screens shows up, reading in the bottom line “ LOADING
DEFAULT SETUP ”
The instrument is now reset to factory conditions.