Minilink pc software, Installation – NTi Audio Acoustilyzer AL1 User Manual
Page 65
64
65
5. MiniLINK PC Software
The MiniLINK PC software enables the transfer of stored measurements
from the Acoustilyzer AL1 to a PC. Additionally online data logging from the
AL1 directly to the PC is supported
Installation
a. Start up the PC with Windows operating system (MiniLINK V3.00 or
higher supports Windows XP, Vista, 7 and 8 (32 & 64 Bit)).
b. Insert the enclosed MiniLINK CD into the CD drive.
c. The MiniLINK software installation starts automatically. Follow the
instructions on the screen.
If the CD auto-start is disabled on the PC, follow the instructions below:
• Click “Start → Run“ on the windows taskbar.
• Type “d:\setup“ (assuming “d“ is the letter of the CD drive)
• Confirm with “ok“
d. Use the supplied USB cable to connect the AL1 to the PC. Windows
recognizes the new hardware component automatically and starts the
hardware installation assistant.
e.
The pop-up window “Digital signature found” will be displayed. Confirm
this and continue with the installation.