Energy display – SATEC PM174 Manual User Manual
Page 40
Chapter 3 Display
Data Display
40
Series PM174 Powermeters
Flicker/Unbalance
4
C.Unb
I% unb
Current negative
sequence unbalance,
percent
Energy Display
Press the ENERGY button. The MVAh, Mvarh, or MWh LED is
illuminated. If TOU registers are configured in the meter, press
the button again to scroll through all active TOU registers. Use
the UP and DOWN arrow buttons to scroll through { XE
"demand" }energy pages.
Along with total energies, per phase energy accumulators are
displayed if phase energy calculation is enabled in the Device
Options menu.
Total and Phase Energies
1
Ac.En.
IP.
MWh
Total Wh import
2
rE.En.
IP.
Mvarh
Total varh import
3
AP.En.
MVAh
Total VAh
4
Ac.En.
EP.
MWh
Total Wh export
5
rE.En.
EP.
Mvarh
Total varh export
6
Ac.En.
IP.L1.
MWh
Phase L1 Wh import
7
rE.En.
IP.L1.
Mvarh
Phase L1 varh import
8
AP.En.
L1.
MVAh
Phase L1 VAh
9
Ac.En.
IP.L2.
MWh
Phase L2 Wh import
10
rE.En.
IP.L2.
Mvarh
Phase L2 varh import
11
AP.En.
L2.
MVAh
Phase L2 VAh
12
Ac.En.
IP.L3.
MWh
Phase L3 Wh import
13
rE.En.
IP.L3.
Mvarh
Phase L3 varh import
14
AP.En.
L3.
MVAh
Phase L3 VAh
TOU Energy Register 1
S
T
ENERGY
ENTER
ENERGY
ENTER