SATEC PM174 Manual - Manual (Page 41)

Chapter 3 Display
Operations Status Display
Series PM174 Powermeters 41
TOU Energy Register 1
1 rEG.1
trF.1
MWh Tariff 1 reading
2 rEG.1
trF.2
MWh Tariff 1 reading
8 rEG.1
trF.8
MWh Tariff 8 reading
…
TOU Energy Register 8
1 rEG.8
trF.1
MWh Tariff 1 reading
2 rEG.8
trF.2
MWh Tariff 1 reading
8 rEG.8
trF.8
MWh Tariff 8 reading
Status Display
The meter has separate status information pages accessible
through the primary device menu. The Status Display shows
rarely used information that is especially helpful when
connecting the meter inputs and outputs to external
equipment. For information on navigating in the menus, see
“Using the Menus”.
To enter the Status Display:
1. From the Data Display, press the SELECT button to enter
the primary device menu. The “StA” window is highlighted.
2. Press ENTER to enter the Status Display. Use the UP
and DOWN arrow buttons to scroll through the status
pages.
To exit the Status Display:
1. Press ESC to return to the primary device menu.
2. Press ESC to return to the Data display.
Status Display
1 PhS
rot
POS/nEG/Err Phase rotation order
2
AG. V1 angle
V2 angle
V3 angle Voltage angles (±180°,
referenced to V1)
3
AG. I1 angle
I2 angle
I3 angle Current angles (±180°,
referenced to V1)
4 rEL
1.2.
00
Relay status
5 St.In
1.2.
00 Status inputs
6 Cnt.1
Counter #1
7 Cnt.2
Counter #2
S
T
S
T
S
T
ENERGY
ENTER
StA
CHG
OPS
SELECT
ENERGY
ENTER